🔩 Cut Above the Rest: Unleash Your Inner DIY Master!
This 44-piece Cutting Wheel Set is designed for rotary tools, featuring HSS circular saw blades, resin cutting discs, and diamond cutting wheels. Ideal for cutting a variety of materials including wood, plastic, and metal, this set is perfect for DIY enthusiasts and professionals alike. With a commitment to quality and customer satisfaction, this toolset is your go-to for precision and versatility.
Compatible Devices | rotary tools |
Item Thickness | 1 Millimeters |
Grit Number | 40 |
Grit Type | Ultra Fine |
Grit Material Type | Diamond |
Construction Type | Cut-off Wheels |
J**J
Only used the cutting discs for metal...
I only bought this for the resin cutting discs (the black ones). I used it to cut through rusted exhaust fasteners where an angle grinder would be too big/unwieldy.I used this kit with Harbor Freight's "1.3 Amp Variable Speed Rotary Tool Kit".To get an idea of what I had to cut through, I cut the following:1. Cut straight through steel M10 exhaust studs to lop them off completely. I had to do two of these.2. Cut a few sides off of steel M10 nuts so I could remove the nuts from the studs. This is for when the nut is so deformed and dissolved due to rust, that neither a regular nor extractor socket could be used. Just cut off a side or two, the nut's clamping power will be relieved then the remnants of the nut can be popped off the threads sideways/perpendicular to bolt's length, with a hammer and chisel. I had to do this with three nuts and these discs.3. Cut straight through flat 1/2" wide stainless steel exhaust clamps holding heat shields on, the nuts and bolts holding the heat shields on were too far gone to get any type of socket on, had to do about six of these.I used a single resin disc to cut through all of those. For the price I was expecting rotten quality: discs exploding on me, wearing down really fast, flying off mandrels, etc. Instead I only needed to use one disc for all of it, the mandrel didn't fail or loosen, by the time I was finished the disc was barely worn and still usable. The performance for the price was great and a nice surprise. I intend to continue using it until that disc fails which is probably not going to be any time soon. Having the ability to cut through metal with such small discs is very handy. Cutting straight through an M10 exhaust stud took about one minute, without applying any pressure either just let the speed do the work, make sure you wear safety squints, gloves and block the sparks if necessary, may want to wear a mask with a particulate filter too, otherwise you can taste the dust lol.Everything in the kit comes in a handy vinyl pouch with see through plastic pockets to organize the contents. I put the resin discs in a separate zip bag with a silica gel packet to keep it free of moisture and avoid water or atmospheric humidity from degrading the resin over time, though they're so small that even if they did come apart mid-cut I doubt they'd do any damage, at least unlike a 4-5 inch angle grinder wheel coming apart at 11000rpm LOL...
D**S
Great for the price!
For the price this set is great! Did the job I needed it to do. Cutting blades get dull fairly quickly but I was able to cut vinyl flooring planks to the custom shape I needed with only two blades. I recommend this product.
B**.
Great Tool to have in your tool box.
This works great for all kinds of DIY projects at home. I have used it a numerous times and it has saved me time and money. I have cut wood, light steel, bolts, plastic with the kit with no problems. It takes a little longer than using a sawzall but I can also get into tight places. It also works great when repairing Xboxes and other electrical components that are not designed to be taken apart to be repaired. I will buy again.
D**N
Great set for the price
First off, this is an excellent value! Better than a lot of the generic blades I have purchased for my rotary tool in the past, for sure. That being said, they ARE generic so don't expect top name brand quality.The resin blades cut well, but they don't seem to be reinforced with fiberglass and therefore they wear down a bit quicker than the product they most closely resemble. Still, they are sturdy- I have not had one break on me yet. Mine came in a little ziplock bag which is handy for storage.The metal blades were a new experience for me. They did a good job on wood but I don't think I would use them on aluminum or anything like that. Pay attention to the direction of rotation- on my Dremel, the printed side faces the tool. Inspect your mandrel before use also, mine had some little burrs on it that threw the blade out of balance at first and made me think my tool was messed up. They came in a sleeve with each of them in a separate sealed pocket which you pretty much have to ruin to open it. No biggie, at least they are protected from each other.I have not used the diamond blades but they appear to be on par with competitive products. Someday I will have a need for them... but it is not this day. Mine were individually sealed in a sleeve like the metal blades. I'm guessing that they could damage each other if left to jostle about in a little bag together.Overall, I'm very pleased with this purchase and will buy it again if it is still available when I need more blades. People always say you get what you pay for, but in this case, you get more.
A**R
Does the job
worth it.
A**R
Not high quality
Works okay. Not the best quality
B**N
Works great!
Works great! Durable and convenient carry pack
H**I
Delivered as advertised!
Great product, so far cutting with easea
Trustpilot
3 days ago
2 days ago